Hello Team, Could you please help me to assign a couple of SNSLI objects (IPSPs) to the same Local AS ? I do want to have 1 Local AS, 1 Remote AS and 2 IPSPs which are assigned to them. But it doesn't work for me. I thought that SNALI command can accept 2 SNLINKs or 2 SNALI commands are fine or something similar. But both ideas don't work so I had to configure a separate Local AS for every new IPSP. Working configuration: CNSYS:IPADDR=10.0.213.185; SNAPI:LAS=1,OPC=102; SNAPI:LAS=2,OPC=102; SNSLI:SNLINK=1,HIPADDR=10.0.213.185,HPORT=2905,IPADDR=10.0.212.116,PPORT=2905,SNTYPE=M3UA,SNEND=C; SNSLI:SNLINK=2,HIPADDR=10.0.213.185,HPORT=2905,IPADDR=10.0.214.41,PPORT=2905,SNTYPE=M3UA,SNEND=C; SNRAI:RAS=1,DPC=101; SNALI:SNAL=1,RAS=1,SNLINK=1; SNALI:SNAL=2,RAS=1,SNLINK=2; Non-working configuration: SNALI:SNAL=1,RAS=1,SNLINK=1; SNALI:SNAL=1,RAS=1,SNLINK=2; Or something like that (I do accept that SNALI has only 1 SNLINK parameter): SNALI:SNAL=1,RAS=1,SNLINK=1,SNLINK=2; Is it a constraint that user has to configure a separate Local AS for every new IPSP ? I would appreciate if you clarified this simple configuration question. Thanks for your help in advance, Alex
↧