Download available at: http://www.dialogic.com/en/products/media-server-software/download/hmp-windows.aspx The following feature were added: Multimedia User I/O -- Service Update 367 has expanded support for HD audio and Multimedia User I/O API. Adaptive Multi-Rate Narrowband (AMR-NB) Audio Codec for RTP - adds support for the Adaptive Multi-Rate Narrowband (AMR-NB) Audio Codec. AMR-NB frame size is 20 ms at 1 to 33 frames per packet G.722.2 Adaptive Multi-Rate Wideband (AMR-WB) Audio Codec for RTP - adds support for the G.722.2 Adaptive Multi-Rate Wideband (AMR-WB) Speech Coder. G.722.2 uses a wideband audio band of 50 to 7000 Hz instead of 200 to 3400 Hz for wideband applications. The increased bandwidth improves the intelligibility and naturalness of speech significantly. VMware ESXi 6.x Support - supported has been added for this version of the hypervisor, The following issues were addressed: IPY00117895 [DNI Board] If the HMP system is shut down while Dialogic Services are running, an NMI error (Uncorrectable PCI Express Error) occurs. IPY00118065 [Firmware] A bugcheck crash occurs in the SSP component of the firmware/driver when using the MM File I/O with AMR-WB and the system is under load. IPY00117899 [Firmware] The MMEV_PLAY event is returned after 1 second when using the MM streaming I/O interface, playing a 15 second prompt, and under load. IPY00117850 [Firmware] The MMEV_RECORD_FAIL event is received after an active recording terminates (MAXTIME) when using the MM streaming I/O interface with AMR-WB and the system is under load. IPY00117732 [Firmware] Outbound faxes fail with TFX_FAXERROR when HMP sends V.17 faxes via the DNI port. IPY00117627 [Firmware] Sometimes when ipm_GetSessionInfo( ) is called, the libipm_ipvsc module randomly crashes. IPY00117565 [Firmware] When using MM Streaming I/O with AMR-WB under load, sometimes an mm_Record does not start and returns the MMEV_RECORD event immediately after execution. IPY00117560 [Firmware] ipm_GetSessionInfo( ) returns invalid QoS values. IPY00117541 [Firmware] A bugcheck crash occurs in the SSP component of the firmware/driver when using the MM Streaming I/O with AMR-NB and the system is under load. IPY00117540 [Firmware] When using MM Streaming I/O, there are audio glitches in G.722 and AMR-xx recordings. IPY00117539 [Firmware] When using MM Streaming I/O to play back a recorded AMR-NB file that is 16 seconds, the MMEV_PLAY event is missing. IPY00117388 [Firmware] A call to gc_SetConfigData( ) to enable or disable the onboard echo canceller hangs indefinitely under certain circumstances. IPY00117163 [Firmware] The tones generated using dx_playtone( ) are too short and the completion event is delayed. IPY00117598 [Global Call] When receiving a SIP call looking to use the G.726 codec, a GEV_TASKFAIL event is returned. IPY00117394 [Host Library] CNG tones are not detected by HMP’s CPA algorithms when using the voice method. IPY00117326 [Installation] There is an "Unquoted Service Path Enumeration" vulnerability for Dialogic services registry entries. IPY00117927 [Installation] When upgrading HMP 3.0 to a newer service update, some old files are not replaced by new ones. It is recommended to uninstall the existing HMP 3.0 software before installing the new HMP 3.0 service update. IPY00118005 [IP Host] CPU useage is high after the remote peer stops responding to SIP messages from HMP. IPY00117658 [IP Host] When the HMP sends a BYE after the application calls gc_InvokeXfer( ) for a blind transfer, the "From" SIP header reverts to the default. IPY00117370 [IP Host] If an outbound proxy is specified by its name, the DNS does not resolve the name and outbound calls return DISCONNECT. IPY00117192 [OA&M] Dialogic® Services start but the underlying components and services fail. IPY00117252 [PSTN] Firmware gc_MakeCall times out for all calls after a particular time on a single E1 use. IPY00117194 [PSTN] Firmware Outgoing calls fail when the number digits do not match the calling, called, and redirection party digits. IPY00116675 [SNMP] The OIDs in the MIBs do not correspond with all of the OIDs that the HMP sends in SNMP traps and the OIDs that can be queried with SNMP GET. The following known issues has been documented: HMP-300 [OA&M] Sporadically, when a user repeatedly stops and starts the HMP services (without an operating system reboot), the HMP services can get into a condition where the services fail to start. Should this occur, a system reboot is required to recover this condition In the Documentation Updates chapter: Added a note in the Dialogic® Host Media Processing Software Release for 3.0WIN Release Guide requiring Windows 7 and Windows Server 2008 R2 users to install Windows security updates 3033929 and 3035131 prior to HMP installation.
↧