Forum Post: RE: SIP Device names
If it helps, I have the RTF output for the last attempt (timestamp and PID fields omitted for brevity #TID #Module 3078355648 sm_main.cpp:340 ! 0 ! gc_h3r:...
View ArticleForum Post: RE: SIP Device names
As an aside: License Type: Trial Expiration Date: 25-oct-2015 License Options: Voice 10, Conferencing 10, Speech Integration 10, RTP_G_711 10, IP_Call_Control 10, Native_RTP 10 License Type:...
View ArticleForum Post: RE: SIP Device names
Ok, I suspect some else is binding to port 5060 on the system in this case. As per: 0x7f000001 : Port=34760 86293360 sip_stack Error ERROR - SOCKET -...
View ArticleForum Post: RE: DM/IP SIP and NAT Traversal
No changes would have been done since DMIP boards were EOL'ed many years (maybe 2010?) ago and are no longer supported. Also, 3PCC as mentioned above is only supported on HMP in this case. Jeff
View ArticleForum Post: RE: SIP Device names
Hello all I'm still smashing my head against a brick wall with this one. I have until 25th October to produce a demo. application and so far can't get past the first gc function call. If no libraries...
View ArticleForum Post: Atlas::Address constructor question
I'm sorry if this is in the wrong area of the forum but have a quick question about the default Atlas Address constructor. I have been given legacy code with no documentation and I cannot find...
View ArticleForum Post: RE: Dialogic D120 causing gateway module to short out
As I figured the issue with their gateway and media modules crashing was not a Dialogic card issue nor was it my server. One of the media modules does not seem to support the 24 ports connected and...
View ArticleForum Post: RE: Dialogic D120 causing gateway module to short out
Interesting -- the D120s have a 600 ohm impedance which is standard for analog handset terminating from the telco line. I wouldn't think it would cause an issue with the switch assuming it is...
View ArticleForum Post: RE: SIP Device names
Rebooting and killing a lot of processes has at least got me past the first GlobalCall operation. Thanks.
View ArticleForum Post: Dropping inbound dialogue requests in overload condition
Hi In order to manage MAP congestion in line with the standard (Section 5.1.2 Overload control for MAP entities), we need to be able to ignore/drop inbound requests when we detect that our platform is...
View ArticleForum Post: RE: Dialogic D120 causing gateway module to short out
Sorry - didn't finish my post...dragged away by another customer. Anywho - it turned out to be an issue with their amphenol cable connected to one of their media modules. Seems that when they use all...
View ArticleForum Post: HMP 4.1 Linux Playing Vox File before gc_AnswerCall
Hi, I am trying to set up IVR response on my SIP server before calling gc_AnswerCall. I connected ip devices with voice device and called dx_play and it works if i call gc_AnswerCall function . If i...
View ArticleForum Post: RE: HMP 4.1 Linux Playing Vox File before gc_AnswerCall
I solved the issue .
View ArticleForum Post: PowerMedia™ XMS – Release 3.0 Now Generally Available
PowerMedia XMS Release 3.0 is now generally available for download at: http://www.dialogic.com/en/products/downloads/xms/xms.aspx ( Please note that an active XMS service contract is needed in order...
View ArticleForum Post: One link in multiple linksets
Hello! I have one M2PA link. I need to configure the system so that several linksets was on this link. Linkset #1: Local Point Code - 1, Adjacent Point Code 11 Linkset #2: Local Point Code - 2,...
View ArticleForum Post: RE: poor audio quality and system performance
Mathieu, Just wanted to provide an update for anyone interested, seems at this time we've resolved the issue. After monitoring a lot of different disk performance attributes we saw that the latency...
View ArticleForum Post: RE: poor audio quality and system performance
Thank you Steve for the feedback, glad to hear the issue is resolved.
View ArticleForum Post: 0xC0000005 error in dssdk.dll
Hello, This might be impossible to solve with the limited information available, but could you perhaps point us in any direction on how to reproduce the following error, then we would be very...
View ArticleForum Post: RE: One link in multiple linksets
1/ define the M2PA link/s 2/ configure MTP3 stack 3/ configure MTP3 LINKSET/s 4/ configure MTP3 LINK/s 5/ configure MTP3 ROUTE/s -Franck.
View ArticleForum Post: RE: One link in multiple linksets
I did it. I can't one link use in two linksets...
View Article