Forum Post: RE: Error 602
You could take a network capture on the DMG, then open it in Wireshark. You should see whether calls are using G.711 or T.38 by graphing the call flow from Analysis VoIP Calls.
View ArticleForum Post: Missing event DivaEventSms1MsgReceived
We're simulating an SMS call from a MS to the SC on one DIVA Analog board. Although the SMS gets sent out by the MS and seems to be received by the SC (see below), we do not get the event...
View ArticleForum Post: RE: Diva Software installation on Linux: build error
No I haven't found any solution yet. The Diva build script tries to compile the drivers with the gcc option -fstack-protector-strong but I am using gcc version 4.8.5 and this option is only supported...
View ArticleForum Post: RE: DMG2000 pour utilisation E1
Have you managed to check the audio signal on the TDM line before it reaches the DMG? Are SIP-SIP calls okay audio-wise? Are TDM-TDM calls okay?
View ArticleForum Post: RE: Diva Software installation on Linux: build error
Can you upgrade gcc on your system? You can edit the build script to change the option if you want.
View ArticleForum Post: RE: Error 602
Found out the problem is on the other end! Finally!!! Thanks ALL!!
View ArticleForum Post: RE: Diva Software installation on Linux: build error
No, I can't upgrade gcc, gcc 4.8.5 is the latest officialy supported version on Redhat Enterprise Linux 7.2. I have tried to understand the buid script and it seems that it looks at the kernel config...
View ArticleForum Post: PDU for SMS submit PDU wrong?!?
We send out a SMS submit PDU which is coded as below (taken from a DIVA trace): 9121010105811721F20004174865696C69677320426C6563686C652C206120534D53210C This PDU cannot be accpted by (again) diva as...
View ArticleForum Post: OS Support for System Rlease 6.1 for Linux
What is the latest version of RHEL supported in SR6.1 for Linux? The last update i saw was SU320 indicating support added for "Red hat Enterprise Linux 6". Does that mean version 6.0 only, or are...
View ArticleForum Post: HMP 4.1: how to record voice from IP?
I'm running HMP 4.1 on Linux. I try to record voice data coming from a RTP endpoint (ipm device), but the record file contains only silence. I'm not confident with functions like dev_Connect(),...
View ArticleForum Post: RE: HMP 4.1: how to record voice from IP?
Hello, your code looks OK, except of 2 parts, First, you don't need to use dev_Connect for this app, dx_listen/ipm_Listen pair would do all you need. Second: In your snippet I don't see how sc_tsinfo...
View ArticleForum Post: RE: HMP 4.1: how to record voice from IP?
Forgot to add, that the code I sent is for Windows VS, but it can be used in Linux apps as far as the IPM and voice resources are concerned.
View ArticleForum Post: RE: HMP 4.1: how to record voice from IP?
I don't see any code, where did you send code?
View ArticleForum Post: RE: OS Support for System Rlease 6.1 for Linux
I believe we have tested up to RH 6.7 in this case with the 2.6.x kernel. There are no plans for RH 7 or 64-bit support right now, as the no new feature are being added currently. The recommendation...
View ArticleForum Post: HMP and DNI: number of devices doesn't reflect the license
I have the following products: HMP 4.1 Linux DNI1210TEPE2HMP (4x E1) License Voice 150, Enhanced_RTP 30, Fax 150, RTP_G_711 30, AMR_NB 30, Native_Audio 30, Native_RTP 30, AMR_WB 30, G_722 30 When...
View ArticleForum Post: RE: fx_sendfax HMP linux
Hi, It stoped happening , it seems it wasn't issue on HMP but other software problem . Thank You for Your reply.
View ArticleForum Post: 2 IP_VIRTBOARDS opened , but always one RTP adress in SDP
Hi, I am using Linux HMP 4.1 dialogic release . I am trying to build application with 2 ethernet cards with different IP adresses . I opened 2 virtual boards (first one to ip adress of eth0 ,second...
View ArticleForum Post: RE: 2 IP_VIRTBOARDS opened , but always one RTP adress in SDP
Hello Mario, Actually, you don't need to use 2 IPT boards to take an advantage of multiple NICs for RTP. Please take a look ch. 1.18 at www.dialogic.com/.../release_update.pdf; is this what you are...
View ArticleForum Post: RE: 2 IP_VIRTBOARDS opened , but always one RTP adress in SDP
Hi, Thank You for Your answer. At first i didn't use 2 IPT virtboards and i did receive calls on both eth0 and eth1 but i had same problem with RTP so i assumed when i opened 2 boards that...
View ArticleForum Post: Start pending on Windows 7
HI I am facing the "Start pending" while I try to start the VFX Dialogic cards on Windows 7, I am using Release 6.0 DCM for windows 7. Can someone let me know if VFX cards are compatible windows 7 at...
View Article