Forum Post: RE: txalarm - local IP state change
Hi Gabor, Technically that message is indicating that the state of an IP route in the TX board's route table has changed. I don't have an exhaustive list of what can trigger it, but the only case I...
View ArticleForum Post: RE: txalarm - local IP state change
Hi Greg, thank you for your answer. In the txalarm output I have changed the IP addresses - used as local SIGTRAN address, as you supposed - from the real one to "1.1.1.1". Sorry, if this change was...
View ArticleForum Post: RE: txalarm - local IP state change
Hi Gabor, I can't really "confirm" it. As I said, I don't have a list of all cases which can trigger that message. But I think your description matches the evidence provided. Best Regards, Greg
View ArticleForum Post: RE: dx_reciottdata with WAVs
Jeff, Thanks for the feedback, I've set ipm_getxmitslot to sync mode and the timeslot info is now correctly set which now makes the record functionality work as expected. That's excellent - than you...
View ArticleForum Post: How does STP work?
Hello, I am making a simulation of some MAP dialogue between MSC/VLR and HLR. I need to include one STP in my network. However, I didn't find clear explanations about the STP's way of working. How...
View ArticleForum Post: Does DM/IP241-1T1-PCI-100BT support Host Based Stack?
Does the card support host based stack without configuring the onboard NIC with an IP address. We are using the current PCD file of @ipvs_evr_isdn_4ess_ml11_311.pcd and FCD of...
View ArticleForum Post: Problem adding Global Title Translation using SCP_MSG_GTT_ADD
After adding a number of Global Title Translations the confirmation message indicates a failure with a status of 07 as follows: S7L:2016-07-22 15:11:34.833 I0000 M t3745 i0000 f33 def r0000 s07...
View ArticleForum Post: RE: Problem adding Global Title Translation using SCP_MSG_GTT_ADD
Hi Geoff, Here are some quotes from "Dialogic® DSI SS7 Protocols SCCP Programmer's Manual Issue 11" 7 Non-Primitive Interface When the SCCP module returns a confirmation message containing a non-zero...
View ArticleForum Post: RE: HMP high fax resolution
Hi Jeff, Thanks, you helped me very much. One question remains, is how to properly convert raw b/w file to tiff? I tried to use different approaches but failed. The most obvious way was to use...
View ArticleForum Post: RE: Does DM/IP241-1T1-PCI-100BT support Host Based Stack?
You need to configure the IP address for the board in the DCM no matter what as that controls the RTP stream. In this case host based stack, means the SIP stack is running on the physical computer and...
View ArticleForum Post: PowerMedia XMS Release 3.0 Service Update 5 (Build 13402) Now...
Download available at http://www.dialogic.com/en/products/downloads/xms/xms3.0_sla.aspx Updates to PowerMedia XMS Release 3.0 Service Update 5 (Build 13402) include: Post-Release Developments : AMR...
View ArticleForum Post: System Release 6.0 PCI for Windows Service Update 271 Updates
System Release 6.0 PCI for Windows Service Update 271 Updates Download: http://www.dialogic.com/en/products/media/system-release-software/download/dialogic/win-pci/6.0-su-latest.aspx In the...
View ArticleForum Post: System Release 6.1 for Linux Service Update 335 Now Available
Download at: http://www.dialogic.com/products/media/system-release-software/download/dialogic/linux/6.1-su-335.aspx In the Post-Release Developments section: Updated Changes in Linux STREAMS (LiS)...
View ArticleForum Post: Signaling link issue
One of running signaling stack; suddenly started to give the link fluctuation towards STP links. Have restarted the stack and asked STP also to reset links but association was not stable (up and...
View ArticleForum Post: RE: How to test IVVR demos with Dialogic ?
Hi friends, i have the same question, im using the D120JCT-LS and i dont know how it tests, or what software i need to use, do you can tell me how do it, pls?. Thanks!.
View ArticleForum Post: RE: How to get the IMEI
Hi Steve, I have been using NMS TX 5000 card for long time. I was using ATI with following RequestedInfo and it used to work fine. //Add requestedInfo ati_arg- str[ati_arg- size+0] = 0xA1; ati_arg-...
View ArticleForum Post: RE: Signaling link issue
confirm the following a. kernel version (cat /etc/redhat/release ) b. DSI sctp or kernel sctp(sctpn)? c. Dev Pack version
View ArticleForum Post: RE: Signaling link issue
please find the details a: Red Hat Enterprise Linux Server release 5.4 (Tikanga) b: DSI Sctp c. DSI gctload Release 6.3.3 (Build 1071)
View ArticleForum Post: SIPControl Channel Licenses
Hey, we are using SIPControl 2.1 with a Dialogic BRI card. Since we need to have 4 channels available at the same time I was looking for licenses, but it seems like there are non available for...
View Article