Forum Post: Camel
Hi All, How to change Orignal Calling Party ID in the CAMELv2 CONNECT message, Aim is to change the CLI
View ArticleForum Post: RE: septel (ssds) and ss7hd (ssdh) in the same linux machine.
Here is the solution (if any interested): Use two different set of modules, the normal ones for septel and the ALT ones for the ss7hd. #define SSD_TASK_ID (0x20) /* SSD interface module */...
View ArticleI am trying to get access to the latest Eicon card development libraries...
I am trying to get access to the latest Eicon card development libraries (ecncb.h and ecncb.lib or ecncb_64.lib). I have forwarded a request to Eicon Developer Support Group Email:...
View ArticleForum Post: Brooktrout TR1034 Fax Board Virtualization
Does anyone know or had experience with being able to pass through the newer PCIe TR1034 fax boards to a virtual machine? I'm curious if this is possible using VMWare or Hyper-V. Also, I saw that...
View ArticleForum Post: RE: Small issue with dcb_setcde function
Hi Hunter, When you set the second pupil, did you listen in the conference to see if it behaved like the first -- i.e. can both pupils hear the coach? I'm not sure, but it makes sense to me that we...
View ArticleForum Post: Route configuration fail in SS7
Hi, I am using DNI1210TEPE2HMP card for both Voice and SS7 protocols. while starting SS7 stack i am getting below error. Reading from system configuration file: 'system.txt' Created LOCAL module Id...
View ArticleForum Post: Resetting board: board 0 reset fails & Configure L1 fails S7MGT:...
Hi, I am trying DSI SS7 stack on DNI1210TEPE2HMP board. I am getting below error, Resetting board: board 0 reset fails S7_MGT Tx:...
View ArticleForum Post: Dialogic HMP4.1 is not compatible with Centos 7?
Hi all, I am trying to install HMP4.1_213 on a Centos 7 machine but I could not successfully install it and it never pops me the manual to choose which package to install after I ran ./install.sh. It...
View ArticleForum Post: RE: Route configuration fail in SS7
configure only one route for your dpc, with the 2 linksets in one MTP_ROUTE command MTP_ROUTE [NC] dpc norm_ls user_part_mask flags second_ls
View ArticleForum Post: RE: Dialogic HMP4.1 is not compatible with Centos 7?
Yes, as per install script the lsb base package is not installed at the Linux level. if ! [ -f /lib/lsb/init-functions ] then echo...
View ArticleForum Post: RE: Route configuration fail in SS7
HI, We have done the changes, then we are reeving "Destination Unavailable" message. Reading from system configuration file: 'system.txt' Created LOCAL module Id 0x20 Created LOCAL module Id 0x0...
View ArticleForum Post: RE: Route configuration fail in SS7
Config file used ******************************************************************************** * * Example Protocol Configuration File (config.txt) for use with * Dialogic(R) DSI Network Interface...
View ArticleForum Post: gc_OpenEx succeed but received GCEV_OPENEX_FAILevent
Hi All, I am currently running my old program (which is working with HMP4.1_151 on Centos5.7) with HMP4.1_213 on Centos7. The gc_OpenEx passed with success but I received a GCEV_OPENEX_FAIL event...
View ArticleForum Post: RE: gc_OpenEx succeed but received GCEV_OPENEX_FAILevent
And we receive the "chmod: changing permissions of â/usr/dialogic/hmpipcâ: Operation not permitted" error message before we receive a GCEV_OPENEX_FAIL event.
View ArticleForum Post: RE: ttyds CID assign
You can check the config.ttydsxx files to set the init sequence to include the calling party number. See this article for reference: www.dialogic.com/.../Diva_M_LIN
View ArticleForum Post: RE: Route configuration fail in SS7
Hi, we have tried changing the flag values and now we are able to see the link coming up, but its not stable. Reading from system configuration file: 'system.txt' Created LOCAL module Id 0x20 Created...
View ArticleForum Post: PowerMedia XMS Release 3.0 SU8 (Build 14707) Now Available
Software download link: http://www.dialogic.com/en/products/downloads/xms/xms3.0_sla.aspx Release notes: http://www.dialogic.com/webhelp/XMS/3.0/XMS_ReleaseNotes.pdf Post-Release Developments : Added...
View ArticleForum Post: RE: Route configuration fail in SS7
************************************************************************************************************************* ********* * Local PC: 6852 (0x1ac4), Remote PC:...
View ArticleForum Post: RE: Route configuration fail in SS7
hi, there was wrong SLC configuration from MSC end, after changing it link issue resolved. but now while running sccp.txt file using s7_play i am getting "TCPSWE_BAD_MSG". Please suggest. SCCP file �
View ArticleForum Post: RE: gc_OpenEx succeed but received GCEV_OPENEX_FAILevent
Did you install the SU while logged in a root? Sounds like permissions issue on application not being able to access the HMP folders. Seen that before when install or application is not running at...
View Article