Forum Post: RE: dlstart HMP4.1LIN Fails
As you may have seen, you need to configure auto start for ipmedia portion of service in CLI using following command: conf system ipmedia start-mode auto. this way dlstart performs the complete start,...
View ArticleForum Post: RE: dlstart HMP4.1LIN Fails
Thanks Jeff. I found that digging around. I don't recall ever needing to do that on the old 3.1 rev. Thanks much for the help!
View ArticleForum Post: why we have to restart DSI after network switch is powered off...
network operation requires reset of the switch to which the SIGTRAN cable is connected. after the switch came up again, the association still down till reset of DSI from server side. is that normal??
View ArticleForum Post: HMP 4.1LIN udom failed cli write error from socket - Verification...
Our first shot at a VMWare box. Other servers load fine. The hosts file has a correct entry of xxx.xxx.xxx.xxx hostname HMP 4.1 LIN Centos 7 Update 1, Linux firewall off, SELinux disabled. After boot...
View ArticleForum Post: RE: why we have to restart DSI after network switch is powered...
This should not be the case. What type of switch are you connected to? Do you know what caused the association to fail in the first place?
View ArticleForum Post: RE: why we have to restart DSI after network switch is powered...
there was operation on switches and they were powered off (planned operation). when the switches came up again the association didn't came up till doing restart for gctload. is there a timer or...
View ArticleForum Post: s7_play over sctp
Hi. I am new in Dialogic and have a question. It is possible to set SendRoutingInfoForSMS by s7_play or mtu when i have only sctp link with m3ua configured?
View ArticleForum Post: s7_play and SRIFSM sctp link
Hi. I am new in Dialogic. It is possible to send srifsm message using s7_play(or mtu) when i have sctp link with m3ua? if yes how can i do this? when i try to do with MAP module there is no result.
View ArticleForum Post: using Sigtran Dialogic stack for establishing a SCCP connection...
I am using the open-source Sigtran Dialogic stack for interfacing with an application which is using C with linux environment, I need to establish a SCCP connection for using the stack for BSSMAP...
View ArticleForum Post: Conference over multiple HMP instances
Hi, We are running multiple Dialogic HMP (Build 382) services with 500 ports each on Windows server 2016, and currently developing solution to bridge (connect) media paths between servers. Will...
View ArticleForum Post: DSI SS7G41 Signaling Server SIU Mode Software updated to Release...
The SS7G41 Signaling Server SIU Mode Software Release 2.4.10 is now released to GA status and is available for download from the DSI Signalling download pages .
View ArticleForum Post: Multiple INTU application (or MAP)
Hello, We are interested on splitting incoming INAP/CAP traffic to SIGTRAN stack based on GTs to different INTU applications. GT1 to be forwarded to module 0x35 and GT2 to be forwarded to module 0x45....
View ArticleForum Post: Brooktrout SDK release schedule
SDK 6.7.5 Released 20 June 2016 Includes a feature to associate the SR140 channel with an incoming called party number, a change to the sip_Contact field format, Windows 2016 support, and a fix issue...
View ArticleForum Post: AFTER INSTALLING HMP 4.1 SERVER DOES NOT START
Hello everyone I have a strange issue on Dialogic HMP linux 4.1 . I installed Cent OS 6.6. 32 bit and it works fine . After i succesfuly install HMP i restart the server for the first time and...
View ArticleForum Post: RE: AFTER INSTALLING HMP 4.1 SERVER DOES NOT START
HMP wouldn't change the BIOS settings and it is interesting that you need to take out the BIOS battery to get this to work. What HMP 4.1 Service Update are using? Also do you have information on...
View ArticleForum Post: Dialogic HMMP for Linux 4.1 Update 236 install on RHEL 7.5
Getting the below error while installing the Dialogic HMP for LInux 4.1 Update 236 on a RHEL 7.5 64 bit: The 32-bit libstdc++ library, required by HMP, was not found. Please correct the issue before...
View ArticleForum Post: PowerMedia HMP 3.0 Service Update 387 Now Available
Download link: https://www.dialogic.com/media-server-software/download/hmp-windows Release Notes: https://www.dialogic.com/~/media/manuals/hmp30win/release_update.pdf HMP-788 Installation - Service...
View ArticleForum Post: RE: Loss of messages in a monitoring mode
Hi Can you please share your config.txt and system.txt
View Article