Forum Post: No audio in outgoing call
Hello, i have a problem with one PBX (SI3000) using outgoing call (HMP SU 361). The external outgoing call is made normally and audio files are played properly. With the internal PBX call the...
View ArticleForum Post: RE: Need to assign a couple of IPSPs to the same Local AS
Hi, Please close and/or remove this topic. In fact I opened another one (thought that had failed to create the current one): www.dialogic.com/.../13866.aspx How to assign a couple of IPSPs to the same...
View ArticleForum Post: RE: How to assign a couple of IPSPs to the same Local AS
Hi, Please kindly ignore the next topic: www.dialogic.com/.../13865.aspx Need to assign a couple of IPSPs to the same Local AS In fact I opened 2 topics as thought that had failed to create the first...
View ArticleForum Post: Caller vs Called number Type/Id - and where to set them
I found we can easily set the CAller Number Type/Id/Presentation/Screening. But where the heck do we set the Called Number Type and Id - required by some of our providers now. Can't seem to find a...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
Hello. What Brooktrout product and call control type are you using?
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
ha ha, ya that would be kinda critical - T1s broken out from a DS3 - T1/PRI card - not sure exactly which model. But for sure T1/PRI, thanks.
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
OK, it sounds then that you'd be using the TR1034 digital board if you use PRI T1. Presentation and screening are parameters for the calling party number anyway. I'm not sure what you mean by the...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
Well this is all very historical stuff - and I gotta dig out my specs. The existing code for Diva cards for many years never set any special values for Calling or Called party number blocks. But in...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
OK, when you mention "Isdn and National" those are values for Numbering Plan and Numbering Type and those are set in callctrl.cfg. I can't speak for Eicon boards at all, but I do know that the...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
Well they are associated in that they must match what you put into the calling number - mis-match and things will go badly. Very surprised I can set screening/presentation on the fly, but not the...
View ArticleForum Post: RE: No audio in outgoing call
Hi, Unfortunately this may be a use case which is not supported as of yet in HMP 3.0 SU baseline. It appears to follow that of Offer/Answer model variant. As per rfc3264 and the application section is...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
I just realized it's actually called the Figure 4-16/Q.931 – Calling party number information element So it has to be directed related to the Figure 4-14/Q.931 – Called party number information...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
So I am looking for Calling Party - Type - Id(aka plan) - Presentation - callctrl.cfg - and via args_cc.calling_party_presentation - Screening - callctrl.cfg and via args_cc.calling_party_screening...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
I did a test with to look at a Setup message with an ISDN message decoder. I was incorrect about that the calling party and called party numbers having their own numbering type and plan. However,...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
Thank you very much for digging further!! In our case I think we happen to luck out here, so far the values do match between called/caller - except for doing international calls. But even use say...
View ArticleForum Post: RE: Caller vs Called number Type/Id - and where to set them
Hello, it sounds here that at this point a formal case should be with Support. You can do that by contacting support@dialogic.com. This forum is really meant just to answer quick questions like...
View ArticleForum Post: DSI-G5x Signaling Controller Software updated to Release 1.8.6
The DSI-G5x Signaling Controller Software Release 1.8.6 is now released to GA status and is available for download.
View ArticleForum Post: Dialogic Linux HMP 4.1 support G729 Codec?
We have Dialgoic LInux HMP 4_1_236. I have few urgent questions to answer customer inquiry/requirements. Please help! Will this version support G729 codec audio file? If yes, does it require any...
View ArticleForum Post: RE: Dialogic Linux HMP 4.1 support G729 Codec?
Here are the short answer: 1. Yes, G729 can be used on network side for streaming of RTP for IP calls in this case 2. Yes, G729 comes as part of Enhanced RTP port option in HMP licensing. 3. Not sure,...
View ArticleForum Post: RE: RECORD NON-CONF CALL
Jeff, I understand the code you sent, but one question. When I purchased new port licenses, I asked for half of the licenses to do everything, and the other half to be just resources I could use to...
View Article