Forum Post: RE: HMP Linux 4.1 update 165 rejects incoming INVITE with 486...
Do you know if there is some unexpected SIP messages which are being sent to the system that are not being handled during runtime? Meaning likes of OPTIONS, or NOTIFY? Potentially some scenario is...
View ArticleForum Post: RE: SS7HDE Card Restart Problem
At one point in time there were issues with several board types due to HP breaking backward compatibility with PCIe in their BIOS. Something similar was seen with HMP/DNI boards as noted here:...
View ArticleForum Post: RE: SS7HDE Card Restart Problem
Thank you Jeff for your valuable post. I will check for this and get back with my results. Thanks again.
View ArticleForum Post: Need to change 24th parameter in firmware file for gc_GetFrame()
I need to access the Data Link layer's Frame using the gc_GetFrame() function. However, the documentation states that I need to change the 24th parameter in the firmware file. I tried to use the...
View ArticleForum Post: PowerMedia XMS Release 3.4 Service Update 7 (Build 20879) Now...
Release notes available at https://www.dialogic.com/webhelp/XMS/3.4/XMS_ReleaseNotes.pdf Download available at The following issue was addressed: XMS-9820 - Interoperability issue with endpoints...
View ArticleForum Post: Hmp win 3.0 on Azure cloud server?
From what I understand HMP WIN 3.0 on a virtual/cloud based machine is only certified for VmWare. Is supported on Azure? I did a search and found that "VoiceGuide" specs their application (Which uses...
View ArticleForum Post: TF_SETINIT initial silence detection not working
Thank you so much in advance if you can lend a hand on this. Should be simple, but... Centos, HMP V4. Code in C All code in this app runs great async mode - just not this piece. The DX_MAXSIL takes...
View ArticleForum Post: PowerMedia XMS Release 3.5 Service Update 8 (Build 21019) Now...
Download link available at https://www.dialogic.com/products/downloads/xms/xms Full releases notes are available at http://www.dialogic.com/webhelp/XMS/3.5/XMS_ReleaseNotes.pdf The following issues...
View ArticleForum Post: RE: TF_SETINIT initial silence detection not working
Switched over to ec_stream code.. Everything worked the first time.
View ArticleForum Post: RE: Hmp win 3.0 on Azure cloud server?
Hi, Just wanted to add a clarification that there has not been any official testing for the Cloud with respect to Azure, Google or AWS with Windows HMP 3.0 SU baseline. So I am not sure why this...
View ArticleForum Post: RE: Need to change 24th parameter in firmware file for gc_GetFrame()
Hi, I guess we would need to know what specific board or product you are using in this case. But I did manage to see further detail in the GC ISDN Tech guide here: www.dialogic.com/.../hmp30win More...
View ArticleForum Post: Voice problem after install windows updates (HMP 3.0, windows...
Hello! After installing the system updates of Windows Server 2008 R2, there was a problem with the operation of the Dialogic telephony boards. The server has 2 HMP 3.0 boards, 8 E1 channels. The...
View ArticleForum Post: Event reporting speed?
So let me precede this by saying I think this may be an issue on HMP systems too from what I've observed. That being said... After some interoperability testing, I've noticed DM3 cards experience a...
View ArticleForum Post: RE: HMP Linux 4.1 update 165 rejects incoming INVITE with 486...
Hi, I instaled update 236, now i have to wait to see if it will hapen again.
View ArticleForum Post: M3UA ERROR notification cause 12 - Unexpected message
Hi, It seems the M3UA Heartbeat is enabled only on signalling gateway and it is disabled on MSC - core network. MSC never sends M3UA Heartbeat to signalling gateway and only gateway sends M3UA...
View ArticleForum Post: RE: Event reporting speed?
How many channels were running when you did the test? Also what boards did you use for comparison sake in this case? While you may be able to compare timing HMP to that of SR since its completely...
View ArticleForum Post: RE: Event reporting speed?
I've tested this with a DM/V1200BTEPEQ and a DM/V960A-4T1 against a D/240JCTT1-EW. Most of the testing has been done with only one call, but I've put up to four calls on there while testing. I made a...
View ArticleForum Post: PowerMedia XMS Release 3.1 Service Update 11 (Build 21043) Now...
Download link: https://www.dialogic.com/products/downloads/xms/xms3-1_sla Release notes: http://www.dialogic.com/webhelp/XMS/3.1/XMS_ReleaseNotes.pdf The following issues have been resolved: XMS-9274...
View ArticleForum Post: Barge In too sensitive and cannot be managed
We are using Dialogic HMP 3.0 with windows, and having an issue with barge in sensitivity, it is too sensitive. We ran a test using the "CSPDemo.exe" application and using the following commands, we...
View ArticleForum Post: RE: Event reporting speed?
Ok, what is the SRL programming model being used in this case for event processing? Singel or multi thread app? Are you measuring the times with the same exact file played between the two tests? I...
View Article