I have a SPCI4 boad And configuation to monitoring SS7. I run gctload.exe every thing ok. But output show " Frame slip, Ber3 occured..." ( I configuation CT bus Master. 0x0043). please help me fix this problem..thank so much.!!!
↧
Forum Post: Frame Slip and BER Occured!!!
↧
Forum Post: SPCI4 with license MM button code
I have SPCI4 boad with license MM button code.. I want monitoring SS7 signal. I need softwave for that. please tell me how about configuation.
↧
↧
is there known issue if we install D/480JTC-2T1 in Lenovo x3650M5 server? in Developer Group
is there known issue if we install D/480JTC-2T1 in Lenovo x3650M5 server? in Developer Group
↧
Forum Post: Error with network appearance
I have problem with NA on my M3ua connections. As I have tried to established m3ua connection, my application started to receive this event m3uaEvent: PROTOCOL, Invalid NA TLV in SSNM DAVA / DUNA / DRST, NA: 0x45 And connection couldn’t be established. I have found in Dialogic manual possibility to map Network Context to Network Appearance and I have sent this message with na set to 0x45 to m3ua layer but event is still coming to my app and same error is sent to peer. What have I missed?
↧
Forum Post: RE: Error with network appearance
would you share your configuration file?
↧
↧
Forum Post: RE: Error with network appearance
I don’t have any “real” config file cause all my messages are sent through app. Application is logging all communication with DSI and this is example from lab environment: 2016-11-09 12:57:13.839 Tx: M-I0000-t7282-i0000-fcf-dd1-s00-r8000-pcfefd00020002000200096000100000000000000 2016-11-09 12:57:13.840 Rx: M-I0000-t3282-i0000-fd1-dcf-s00-r0000-pcfefd00020002000200096000100000000000000 2016-11-09 12:57:13.840 Tx: M-I0000-t7283-i0000-fcf-dd1-s00-r8000-p010a0a6f48000000000000000000000000 2016-11-09 12:57:13.840 Rx: M-I0000-t3283-i0000-fd1-dcf-s00-r0000-p010a0a6f48000000000000000000000000 2016-11-09 12:57:13.840 Tx: M-I0000-t7286-i0000-fcf-dd1-s00-r8000-p0f680f6800200020000000c800000578000003e800000000000003e8000000000000000200020000000000000000006400c8019000010000000000000000000000000000000000000000000000000000 2016-11-09 12:57:13.840 Rx: M-I0000-t3286-i0000-fd1-dcf-s00-r0000-p0f680f6800200020000000c800000578000003e800000000000003e8000000000000000200020000000000000000006400c8019000010000000000000000000000000000000000000000000000000000 2016-11-09 12:57:13.841 Tx: M-I0000-t7287-i0000-fcf-dd1-s00-r8000-p010a0a6f5b000000000000000000000000 2016-11-09 12:57:13.841 Rx: M-I0000-t3287-i0000-fd1-dcf-s00-r0000-p010a0a6f5b000000000000000000000000 2016-11-09 12:57:13.841 Tx: M-I0000-t72c0-i0000-f1d-dd2-s00-r2000-pcfefcf000200000040000000000000 2016-11-09 12:57:13.864 Rx: M-I0000-t32c0-i0000-fd2-d1d-s00-r0000-pcfefcf000200000040000000000000 2016-11-09 12:57:13.865 Tx: M-I0000-t72c4-i0000-f1d-dd2-s00-r2000-p00000000000000 2016-11-09 12:57:13.865 Rx: M-I0000-t32c4-i0000-fd2-d1d-s00-r0000-p00000000000000 2016-11-09 12:57:13.865 Tx: M-I0000-t72c1-i0000-f1d-dd2-s00-r2000-p000a00000000d1000000000000 2016-11-09 12:57:13.865 Rx: M-I0000-t32c1-i0000-fd2-d1d-s00-r0000-p000a00000000d1000000000000 2016-11-09 12:57:13.865 Tx: M-I0000-t72c2-i0000-f1d-dd2-s00-r2000-p00320000000000000002000700000000000d00000000000000000000000000020000 2016-11-09 12:57:13.865 Rx: M-I0000-t32c2-i0000-fd2-d1d-s00-r0000-p00320000000000000002000700000000000d00000000000000000000000000020000 2016-11-09 12:57:13.865 Tx: M-I0000-t72c5-i0000-f1d-dd2-s00-r2000-p00000000000500000000 2016-11-09 12:57:13.865 Rx: M-I0000-t32c5-i0000-fd2-d1d-s00-r0000-p00000000000500000000 2016-11-09 12:57:13.866 Tx: M-I0000-t72f5-i0000-f1d-dd2-s00-r2000 2016-11-09 12:57:13.866 Rx: M-I0000-t02e2-i0000-fd2-dcf-s03-r0000 2016-11-09 12:57:13.866 Rx: M-I0000-t32f5-i0000-fd2-d1d-s00-r0000 2016-11-09 12:57:13.866 Rx: M-I0000-t029e-i0000-fd1-dcf-s18-r0000-p0000006300000000 2016-11-09 12:57:13.866 Tx: M-I0000-t72c7-i0000-f1d-dd2-s00-r2000-p00000000007b 2016-11-09 12:57:13.866 Rx: M-I0000-t029e-i0000-fd1-dcf-s18-r0000-p0000006300000001 2016-11-09 12:57:13.866 Rx: M-I0000-t028d-i0000-fd1-dcf-s01-r0000-p00200020 2016-11-09 12:57:13.866 Rx: M-I0000-t32c7-i0000-fd2-d1d-s00-r0000-p00000000007b 2016-11-09 12:57:13.866 Tx: M-I0000-t72c3-i0000-f1d-dd2-s00-r2000-p0000000001590000 2016-11-09 12:57:13.866 Rx: M-I0000-t32c3-i0000-fd2-d1d-s00-r0000-p0000000001590000 2016-11-09 12:57:13.866 Tx: M-I0000-t72c6-i0000-f1d-dd2-s00-r2000-p000000000000 2016-11-09 12:57:13.867 Rx: M-I0000-t32c6-i0000-fd2-d1d-s00-r0000-p000000000000 2016-11-09 12:57:13.867 Rx: M-I0000-t028d-i0000-fd1-dcf-s02-r0000-p00100010 2016-11-09 12:57:13.868 Rx: M-I0000-t02e2-i0000-fd2-dcf-s02-r0000 2016-11-09 12:57:13.868 Rx: M-I0000-t028e-i0000-fd1-dcf-s01-r0000-p010a0a6f5b00000000000000000000000000000100010001 As you can see t72c7 msg is sent with 0x7b NA which is defined on the other side
↧
Forum Post: RE: Error with network appearance
2016-11-09 12:57:13.866 Tx: M-I0000-t72c7-i0000-f1d-dd2-s00-r2000-p00000000007b This shows you configure network context 0 to network appearance 0x7b and not 0x45
↧
Forum Post: RE: Error with network appearance
Yes because this is from lab environment, where NA is set to 0x7b This is event from lab: m3uaEvent: PROTOCOL, Invalid NA TLV in SSNM DAVA / DUNA / DRST, NA: 0x7b
↧
Forum Post: PSL_ANALOG_NUM_RINGS_BEFORE_RINGON no longer working?
We are trying to get a D/41JCT-LS system working in a WS2012 environment with Dialogic SR 6.0PCI Build 271 Production. It seems to function, with one notable exception: The parameter PSL_ANALOG_NUM_RINGS_BEFORE_RINGON no longer seems to have any effect; despite being set to 1, the globalcall interface only generates a "call detected" event after two rings. (We are editing the pdk_na_an_io.cdp file to try to make this change, which has always worked in the past.) Not knowing exactly what to enable in the RTF config, I enabled probably more than I needed, but the attached zip contains three consecutively generated log files showing the loading of the parameter above with the correct value, but then still taking 2 rings before answer. Can anyone tell me what I have to do to get it to answer on the first ring? Thanks in advance, /Will
↧
↧
Forum Post: Application crash when fax answer
Hi, I create a test application who call a fax. But when I close the call, my app crash most of the time. I create this APP with Visual Studio 2015 (VB.NET) on Windows 10 computer. What can I do. My DIVA SDK is 5.5.2.3074 Maybe it's preferable that I use another Windows version ?
↧
Forum Post: Configure NFS on IMG2020
HI, I followed the instructions for install the NFS server and also activate the calltracing, but I always get the result: Configuration NFS server failed, it looks as initializing but never come up. DSP Service Diags mmachine name = IMG0 user ID = 1001 group ID = 100 Server Id 1 - Server State 2 172.27.2.31:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/treatment/datafiles 172.27.2.30:/opt/dialogic/common/treatment/datafiles Server Id 2 - Server State 2 172.27.2.31:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/treatment/datafiles 172.27.2.30:/opt/dialogic/common/treatment/datafiles Server Id 3 - Server State 2 172.27.2.31:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/config/routing/sending 172.27.2.30:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/calltracing 172.27.2.31:/opt/dialogic/common/treatment/datafiles 172.27.2.30:/opt/dialogic/common/treatment/datafiles hostname inet address aliases -------- ------------ ------- localhost 127.0.0.1 vxTarget 172.27.2.30 IMG0 factorydefault 172.27.27.251 NFS_Server1 192.168.254.208 NFS_Server2 NFS_Server3 /sending/ 172.27.5.1 the NFS service in the server is running: [root@GCEMS calltracing]# service nfs status rpc.mountd (pid 5563) is running... nfsd (pid 5560 5559 5558 5557 5556 5555 5554 5553) is running... rpc.rquotad (pid 5547) is running... any idea what we can try in order to have the NFS mounted OK?
↧
Forum Post: GCEV_EXTENSION issue
Hi, I am trying to get my called party rtp address and port in 1PCC. I have read globalcall_for_ip_hmp_v10.pdf part 4.6.2 and want to receive GCEV_EXTENSION event. I have added the following piece of code but receive an error in the rtflog. Can anyone help? GC_PARM_BLK *parmblkp = NULL; gc_util_insert_parm_val(&parmblkp, IPSET_EXTENSIONEVT_MSK, GCACT_SETMSK, sizeof(long), EXTENSIONEVT_STREAMING_STATUS ); printf("gc_SetConfigData start, parmblkp: %p\n", parmblkp); if (gc_SetConfigData(GCTGT_CCLIB_NETIF, pline- ldev, parmblkp, 0, GCUPDATE_IMMEDIATE, &(pline- request_idp), EV_ASYNC) == -1){ GC_INFO gc_error_info; /* GlobalCall error information data */ gc_ErrorInfo( &gc_error_info ); printf("[globalcall_error] gc_SetConfigData, GC ErrorValue: 0x%hx - %s, CCLibID: %i - %s, CC ErrorValue: 0x%lx - %s\n", gc_error_info.gcValue, gc_error_info.gcMsg, gc_error_info.ccLibId, gc_error_info.ccLibName, gc_error_info.ccValue, gc_error_info.ccMsg); } else { printf("gc_SetConfigData ok, parmblkp: %d\n",parmblkp); } gc_util_delete_parm_blk(parmblkp); 11/10/2016 15:48:57.025 24138 3078416080 gc_h3r ERR1 unpack.cpp:222 ! 0 ! Unpack::setConfigData : SetConfigData work only on board !! : 11/10/2016 15:48:57.025 24138 3078416080 gc_h3r ERR1 sm_data.cpp:508 ! 0 ! SetConfigData: , pUnPack- setConfigData failed 11/10/2016 15:48:57.026 24138 3078416080 gc ERR1 gc_rtcm ----- rtcm_SetConfigData(target_type:9, target_id:1, request_id:1) - ccfp_SetConfigData(cclibid:8) returns:-1 11/10/2016 15:48:57.026 24138 3078416080 gc ERR1 gclib :::: gc_SetConfigData(target_type:9, target_id:1, timeout:0, update_cond:0, request_id:1, mode:async) - returns:137
↧
Forum Post: RE: HMP CRASH SINCE SU354 (next)
Hi, Ok, this was on SU354? I know there were some issues with that build in cheetah library having exceptions which were address in Su360 in this case. Please upgrade and re-test. Jeff
↧
↧
Forum Post: RE: GCEV_EXTENSION issue
Are you calling gc_setconfigdata on the IP board device (iptB1) as opposed to channel device which is not supported in this case for that specific parameter. Jeff
↧
Forum Post: VMWare Cloud on AWS support for HMP 3.0
Are there any plans to officially support Dialogic HMP 3.0 on VMWare Cloud in an AWS environment? AWS used to be just XEN based. Now VMWare is also available on AWS - it might follow that HMP 3.0 would work on that.
↧
Forum Post: RE: SPCI4 with license MM button code
Software for the DSI boards (including SPCI4) is available here: www.dialogic.com/.../dsi-network-interface-boards.aspx Look for 'DSI DevPak for PickYourOS ' // Windows, Solaris or Linux Two documents that may help: 1. Software Environment Programmer's Manual: www.dialogic.com/.../U10SSS-SwEnv-PM.pdf - installation - how to configure system.txt and config.txt in general - section 8.3.1 for monitoring 2. SPI Network Interface Board Programmer's Manual: www.dialogic.com/.../SPCI-PM.pdf - contains information on License Buttons. The following link is a decent starting point for config.txt and system.txt but will need to be changed to reflect your environment (SPCI board for example): www.dialogic.com/.../Signaling_SS7 (Ignore the gcss7.cfg part near the end). The following demo may help get you going in the right direction. But I would expect you'll have to do development to get what you want: www.dialogic.com/.../U28SSS03-SSM-UG.pdf The source code should be in InstallDir /UPD/SRC/SSM
↧
Forum Post: RE: HMP board support for both Voice and Signlaing (CAP,MAP)
The DNI1210TEPE2HMP board supports ISUP using DSI SS7 and the GlobalCall API if you are using Windows. Best information is in Section 1.17 of the Release Update: www.dialogic.com/.../release_update.pdf You can also use it for SCCP, TCAP and MAP but you'll need to use the DSI API (not GlobalCall). The application that handles GlobalCall signaling can also have these DSI API calls. But, you'll be responsible for interacting with two different subsystems: - GlobalCall (for ISUP) - DSI API directly (SCCP, TCAP, etc) Good starting point for HMP (including software download): www.dialogic.com/.../hmp-windows.aspx DSI SS7 software is available here: www.dialogic.com/.../dsi-network-interface-boards.aspx Select 'DSI DevPak for Windows'. There are sample gcss7.cfg, config.txt and system.txt files here to use as a starting point: www.dialogic.com/.../globalcall_for_ss7_v6.pdf Then you would incorporate any DNI specific differences mentioned above (in the Release Update) into each file.
↧
↧
Forum Post: HMP Contact: header question
Can anyone tell me how HMP (WIN SU367) fills in the "Contact:" header when sending a 200 OK in response to an incoming INVITE?.
↧
Forum Post: HMP Contact: header question
Can anyone tell me how HMP (WIN SU367) fills in the "Contact:" header when sending a 200 OK in response to an incoming INVITE?. IE: Does it come from the request line "Request-URI"?
↧
Forum Post: RE: GCEV_EXTENSION issue
Hi there, Thank you for your reply. pline- ldev is the line device (terminology used in pdf) which has the value of 1 in the case above. The value is obtained by gc_OpenEx (1st parameter). As far as I know, a board device is a line device. Let me know if I am wrong. If I am wrong about how the handle of the board device is obtained, let me know. By the way, I am using SIP and am modifying the demo gc_basic_call_model to do 1PCC. See gc_demo_open_SIP_channel in gc_basic_call_model. if (gc_OpenEx(&hmp_channel[index].ldev, hmp_channel[index].devname, EV_ASYNC, (void *)&hmp_channel[index]) != GC_SUCCESS) { sprintf(str, "gc_OpenEx(devicename=%s, mode=EV_ASYNC) Failed", hmp_channel[index].devname); printandlog(index, GC_APIERR, NULL, str, 0); exitdemo(1); }
↧