By looking at the driver install I think It shoudl be creating /dev/ttyds0X - 24 The card is a 24 port PCI card. T1 interface. However after running config i get Check Diva configuration ... succeeded, Board not loaded In /dev/ I only get this tty crw-r--r--. 1 root root 8, 0 Apr 19 07:39 ttydsctrl crw-r-----. 1 root root 245, 0 Apr 19 07:26 Divas crw-r-----. 1 root root 245, 2 Apr 19 07:26 DivasCTRL crw-r-----. 1 root root 246, 0 Apr 19 07:26 DivasDIDD crw-rw-rw-. 1 root root 244, 0 Apr 19 07:26 DivasIDI crw-rw-rw-. 1 root root 245, 1 Apr 19 07:26 DivasMAP crw-rw-rw-. 1 root root 245, 3 Apr 19 07:26 DivasXDI I see capi as well crw-rw-rw-. 1 root root 68, 0 Apr 19 07:39 capi20 What shoudl I do to get it to be modems Modules loaded are [root@localhost.localdomain dev]# lsmod Module Size Used by diva_mtpx 625177 0 diva_idi 55803 0 divas 255372 0 divadidd 90938 5 diva_mtpx,diva_idi,divas lspci -vvvvv out put 0d:03.0 Unassigned class [ffff]: Dialogic Corp Springware D/240JCT-T1 (prog-if 01) Subsystem: Dialogic Corp Springware D/240JCT-T1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: Memory at fc6ffc00 (32-bit, non-prefetchable) [size=128] Region 2: Memory at fc6e0000 (32-bit, non-prefetchable) [size=64K]
↧