Forum Post: RE: Best way to find the end of voicemail greeting
I also need to be able to leave voicemails when I call someone. We are using Powermedia XMS.
View ArticleForum Post: RE: Answer Machine Detection And Timing
What you can do is configure XMS the possible tones for answer machines. It is in XMS webUI, Tones. Next in your RESTful application, set Async_tone ="yes" when you making an outbound call. Once call...
View ArticleForum Post: RE: Answer Machine Detection And Timing
Where can I find a list of the most common tones? I feel like these should be included in every build that is distributed.
View ArticleForum Post: RE: Standard Runtime Library on Windows Server 2012 32bit OK ?
Thanks for the answer
View ArticleForum Post: Dialogic D/42 with Nortel Business Communications Manager
Will this dialogic board work with the BCM? If so, what version BCM? Also, what version of the Digital Station Module?
View ArticleForum Post: RE: SendVoiceFilesEx does not stop sending
But it stops when the files are played, right? Try a shorter file, set continuous to TRUE and set the timeout to something longer than the file's duration.
View ArticleForum Post: RE: Dialogic D/42 with Nortel Business Communications Manager
This is not the right forum for this device, you can try contacting your reseller or Dialogic Support.
View ArticleForum Post: RE: Using a single DMG1008 for 2 environments
Yes you can have two different SIP endpoints talking to the DMG's IP, and the DMG can route to different SIP endpoints based on the routing table you enter in the configuration. As long as the routes...
View ArticleForum Post: Multiple DNI boards give CT Bus error
Im trying to figure out a problem with server which has multiple DNI boards. The server has 2 DNI1210TEPE2HMP boards and also the correct licensing for it. The problem is when starting the system the...
View ArticleForum Post: RE: DMG 2000 SIP TLS Certificate Verification Failure
I would expect that as long as transport is set to TLS the DMG will check the validity of the certificate. It is possible your certificate is bad. You can try generating a trace and enable all logging...
View ArticleForum Post: RE: Multiple DNI boards give CT Bus error
Hi Espen, As a first step, check if you have connected the boards with sync route cable and set the termination jumpers on the boards. Please see "Setting CT Bus Termination" in...
View ArticleForum Post: RE: Multiple DNI boards give CT Bus error
Hey Sunil There is no syncroute cable present in the server. Is the syncroute cable required for operating more than 1 DNI board in the same server? When reading the documentation it seems more like...
View ArticleForum Post: PowerMedia XMS 2.4 Service Update 6 (Build 11432) Now Available
Software download available at (SLA required) : http://www.dialogic.com/en/products/downloads/xms/xms2.4_sla.aspx Release notes available at :...
View ArticleForum Post: RE: Multiple DNI boards give CT Bus error
Hi Espen, It is required to use sync route cable when using more than one DNI board in the system. Please see section "5. Installing the Board" in www.dialogic.com/.../64-1122-03.pdf . I hope this...
View ArticleForum Post: Audio Channel ( sc_channel) number & CIC relation
Hi I have 4 E1. with ss7MD card. Currently for single E1 the mapping is CIC channel number 1 10 2 11 ... .. 31 39 If there is any command to find...
View ArticleForum Post: Diva V-xPRI Media Boards -- How to access COM ports across network
I'm looking for software or functionality to allow me to access the local COM ports that the Diva high density modem card provides across my LAN. I want to be able to connect from one server to the...
View ArticleForum Post: Webinterface on Ubuntu 14.04
Hello! I'm trying to set up a 4BRI-8 PCIe on Ubuntu 14.04 LTS but I cannot get the webinterface working. Can anyone please tell me which libraries I have to install? I tried with strace:...
View ArticleForum Post: Important information on potential DMG 4000 licensing issue
As a result of a product licensing design implemented many years ago, Dialogic® Diva® licenses used in certain Dialogic® 4000 Media Gateway Series (DMG 4000) models will expire on December 4, 2015....
View ArticleForum Post: Important information on potential Diva Product licensing issue
As a result of a product licensing design, all licenses for Dialogic® Diva® Software-Only Products and all licenses separately installed to enable additional features on Dialogic® Diva® Media Boards...
View Article
