Forum Post: Important information on potential Diva Product licensing issue
As a result of a product licensing design, all licenses for Dialogic® Diva® Software-Only Products and all licenses separately installed to enable additional features on Dialogic® Diva® Media Boards...
View ArticleForum Post: Important information on potential DMG 4000 licensing issue
As a result of a product licensing design implemented many years ago, Dialogic® Diva® licenses used in certain Dialogic® 4000 Media Gateway Series (DMG 4000) models will expire on December 4, 2015....
View ArticleForum Post: IPMEV_INIT_RECEIVED repeated when already received...
Hi, I don't understand why IPME_INIT_RECEIVED repeated frequenly. This is my debug console, please help? ipm_InitSend successful for Nbup for device=ipmB1C1 Received a non-GC Event 0x9023...
View ArticleForum Post: sr_WaitThreadDeviceGroup() doesn't retrieve some events on HMP Linux
I have an application that makes use of the "thread device group" functionality in the Standard Runtime Library. After opening my primary board with gc_OpenEx() , I pass the line device id to...
View ArticleForum Post: HMP with Call Script app (VoiceGuide): "488 hot acceptable here"...
Hello, We are using HMP with IVR app called VoiceGuide for our IVR solution. After upgrading the software VoiceGuide, we get "488 not acceptable here" error upon "re-INVITE." The call script used for...
View ArticleForum Post: RE: ipm_InitResponseSend raise IPMEV_ERROR
This is error in trflog 10/29/2015 13:40:27.717 2045 2972117904 Dm3Odi.dll Error Qcd [0:1:1:5:1] CDm3StdComp::Dm3GetErrorResult() - (Std_MsgError) Message[0x402b] Xid[0x7]...
View ArticleForum Post: Dialogic Diva PRI/E1-30 PCI card not compatible with HP Proliant...
The drivers do not work, dialogic tech support have attempted to resolve but could not. They tried latest software release 8.5WIN Update 14 A workaround using a generic mircosoft driver worked...
View ArticleForum Post: HMP 4.0 BICC how to bridge 2 calls
Hi, My system dial to party A, and party B. After A answer and B answer, I want to bridge call between A and B for conversation between A and B. How can I do? I use BICC with IPM and MM Thank you very...
View ArticleForum Post: RE: Guidance required on Configuration SS7MD board
Issue Solved successfully. There was a isup Configuration mismatch
View ArticleForum Post: RE: Dialogic Diva PRI/E1-30 PCI card not compatible with HP...
This wouldn't be the right forum for this post. Nevertheless, for installation issues like this we'd encourage you to work directly with the support team. We can confirm that we have not seen any...
View ArticleForum Post: SDP on INVITE in 1pcc mode from HMP application
I have an HMP application that runs in 1pcc mode. I am unable to make outbound calls with a single major hosted PBX provider because they always reply "603 Decline". After much debugging at the hosted...
View ArticleForum Post: RE: HMP with Call Script app (VoiceGuide): "488 hot acceptable...
Could someone reply? I am a bit desperate here. thanks.
View ArticleForum Post: RE: SDP on INVITE in 1pcc mode from HMP application
No, regrettably, in 1PCC the application does not have direct access to SDP. "i=" is a valid field, and HMP has no tuning to remove it.
View ArticleForum Post: RE: HMP with Call Script app (VoiceGuide): "488 hot acceptable...
The second Invite comes with G729 codec, which is probably not licensed on your system. Also, both offers come with 20 ms frame size, while the app sets 30 ms; I'd fix this first.
View ArticleForum Post: **911 Assistance** Help! Dialogic DMG1008DNIW - Exchange 2013 UM...
I hope i'm posting this in the corret forum and that someone can assist. We have no current support contract and can't get through to Dialogic without one until Monday morning. We have no Voicemail...
View ArticleForum Post: RE: HMP 4.0 BICC how to bridge 2 calls
Hello, Dialogic has no currently a product HMP 4.0. If you mean 4.1 (Linux), or 3.0 (Windows), you can use SIP REFER method to bridge 2 calls. I'm not sure what you denote under BICC, but if the app...
View ArticleForum Post: RE: HMP 4.0 BICC how to bridge 2 calls
Thank you very much. You're right, I mean 4.1. I don't use SIP. My signalling is sigtran/bicc and use ipm and mm for play rtp streaming audio. Do you have a suggestion?
View ArticleForum Post: Products Licensing Issue
In attention to Dialogic's email on Products Licensing Issue, I have a question. We have 2 servers that both use Diva cards for a telephony solution, on one server su8 is installed, and su11 on...
View ArticleForum Post: RE: HMP 4.0 BICC how to bridge 2 calls
Ok, just to chime in here, just full duplex route the two IPM devices together in this case. Since that represents the incoming RTP streams from the callers in this case. So call ipm_getxmitslot for...
View Article