Forum Post: RE: Please help dissect this Error Message
Details f00401230105 f0 - indicates its 2 octet value 04 - Length 0123 - Parameter 01 - value Len 05 - value Hope it helps
View ArticleForum Post: RE: No board in DCM after HMP install
Ok, I suspect you might have run into a variant of what is noted here: www.dialogic.com/.../PM_HMP_WIN A lot of times the "driver signature enforcement" needs to be disabled. Jeff
View ArticleForum Post: RE: D/480JCT-1T1 - How to use board 2?
In this case, you would need to have to purchased a D/480JCT -2T1. The difference is that this board was specifically designed (it's rather as it dates 2000s) for handling CSP capabilities since that...
View ArticleForum Post: RE: Please help dissect this Error Message
Hi coolrahul28, I am very very thankful to you. This has solved my problem. I was able to successfully generate a SAI request and capture it using Wireshark. But I have a confusion: According to page...
View ArticleForum Post: RE: Please help dissect this Error Message
Hi coolrahul28, "your parameter TAG 240 ( here 291 decimal, 0x123 hex) which has to be encoded differently." Sorry I initially didn't fully understand this part of your answer. Hence my previous...
View ArticleForum Post: DMG2000 T1 CAS link to Exchange EUM 2013 20 Seconds before audio
Have a strange issue, with a DMG2000 T1 CAS link from Avaya G3. I have to set Auto Answer on TypeII CPID to Yes in order to collect my CPID digits. When set this way it is taking 20 seconds before...
View ArticleForum Post: RE: DMG2000 T1 CAS link to Exchange EUM 2013 20 Seconds before audio
Actually I am seeing this on subscribers, auto attendants and pilots
View ArticleForum Post: RE: VB6 multiple call architecture
Hi - Are you still looking at this? You should be able to just create an array of DivaCall and use the events to drive your code... I'm porting my VB6 platform to .Net and using the SDK so may be...
View ArticleForum Post: How to dissect this Global Title Address?
I used MTU to send a forwardSM message from my local end to remote end, and ROUTED THIS MESSAGE ON GT. Here is my configuration for GTT in my config.txt file: SCCP_GTT_PATTERN 1 0x10 0 0 0x001104...
View ArticleForum Post: How to resolve TCAP Maintenance Event : TCPEV_DLG_REQ_DISCARD
I want to send an SAI request uring S7 Play. I have been able to successfully route it on SSN (not without the help of this thread), but now I want to be able to route it on GT. For that, I need to...
View ArticleForum Post: Detect if Board is DM3 or JCT ?
I have a DMV1200BTEP board , I realized that DM3 boards do not support Alaw11K play formats , and they support only Alaw6K and Alaw8K but JCT boards (D/300 , D600) do. when an unsupported file type is...
View ArticleForum Post: RE: VB6 multiple call architecture
Thank you for the response. We ended up going with the D/480JCT-2T1 cards. Surprisingly, the old software works fine with this new hardware.
View ArticleForum Post: RE: How to resolve TCAP Maintenance Event : TCPEV_DLG_REQ_DISCARD
From Page 60 of TCAP Programmers' Manual, is generated when Dialogue request primitive discarded due to bad format, inappropriate state or lack of internal resources. I think it must be Bad Format in...
View ArticleForum Post: Again Bad User Format - Please help
I used the following mtr.exe and mtu.exe commands to send a forwardSM MAP request from my local (MTU side) to my remote (MTR side) end. THIS WAS A SUCCESS . mtr.exe -m0x2d mtu.exe -d0...
View ArticleForum Post: java.lang.UnsatisfiedLinkError when running Diameter DTU
I need to exchange Diameter messages between my local and remote end. So I installed two Virtual Machines with Ubuntu 16.04 32bit OS and installed Dialogic DSI Stack in both of them. Then when I run...
View ArticleForum Post: Diva(R) System Release 9.6LIN SU4 now available
Diva(R) System Release 9.6LIN SU4 now available for download from: http://www.dialogic.com/en/products/media/system-release-software/diva-for-linux/diva-sr-lin-download.aspx - The 9.6LIN SU4...
View ArticleForum Post: NaturalAccess(TM) Development Environment Release 9.0.9 is now...
NaturalAccess(TM) Development Environment Release 9.0.9 is now available for download from:...
View ArticleForum Post: HMP Device name conversion
Hello, I have 16 channel hmp license. Just wondering what naming convention for IPM channel naming. I successfully opened two lines with device name:devicename=:N_iptB1T1:P_SIP:M_ipmB1C1 and...
View ArticleForum Post: RE: HMP Device name conversion
In this case the IPT and IPM devices all increment by one in this case for that single virtual board. So if you have 16 ports license for both SIP (IP) and RTP (basic or enhanced) in your HMP license...
View ArticleForum Post: license issue
Hi, I have a 16 port license activated on my server, but I could only open two lines and the third line failed at gc_OpenEx with an error message of "Error on device handle: 0x0, GC ErrorValue: 0x44 -...
View Article