Forum Post: RE: Products Licensing Issue
A few days ago, we performed a simple test on one of our servers, so that we changed the server time to the future - December 30 - but our fax service continued working normally. Once again, we...
View ArticleForum Post: RE: Products Licensing Issue
You should contact your local support so they can have a look at your server. However, this is a good sign that you will not encounter the licensing issue on December 4th.
View ArticleForum Post: RE: Products Licensing Issue
If we want to risk, and do not do anything and monitor the service for a likely unusual behavior, what time precisely we should expect the event to occur?
View ArticleForum Post: RE: Products Licensing Issue
The issue should occur on December 4th at midnight (i.e. during the night between 3rd and 4th).
View ArticleForum Post: Migration from ISDN system (implemented with AG4000 boards) to...
Hello, my name is Diego Martinez Viademonte, I am from Argentina, and this is my first post in this forum. I have implemented successfully several phone chat services with Euro ISDN E1 trunks and...
View ArticleForum Post: RE: Problem with more calls at same time
You would have to check what happens to that call at signalling level. I.e. take a Diva Diagnostics trace and see what D-X/D-R frames are received/sent on those failing calls. If the network...
View ArticleForum Post: RE: Transferred calls do not go to voicemail DMG1008DNI with...
You would need to look at the signalling between Exchange and the DMG to see what's different between a good case and a bad case. If you have no luck with that you might consider purchasing a support...
View ArticleForum Post: Problem with sending more than 15 fax documents on a Diva...
I'am working on a Fax implementation, which sends sequentially fax documents. It can be observed that 15 fax documents are sent correctly. When trying to send the 16th fax document the Diva card comes...
View ArticleForum Post: RE: Problem with sending more than 15 fax documents on a Diva...
There is a telco certification limit for the number of calls that can be made in a short time to the same location on analog lines so this is probably kicking in here. Can you try calling 2 or 3...
View ArticleForum Post: RE: Problem with sending more than 15 fax documents on a Diva...
I don't believe that this is a telco limitation. With our test application we can switch between normal voice calls and the fax function using the same lines device on the Diva Analog-2 board. With...
View ArticleForum Post: RE: Problem with sending more than 15 fax documents on a Diva...
This is a telco 'certification' issue, ie standard telco guidelines are that if more than 15 call attempts per minute are made to the same number then the board should reject further call attempts for...
View ArticleForum Post: RE: Problem with sending more than 15 fax documents on a Diva...
Thank you very much for the previous information. I made some tests (dynamically modified parameter MaxRedialAttempts via the Diva GUI) with the following results: 1. When MaxRedialAttempts is set to...
View ArticleForum Post: RE: SEND-ROUTING-INFO-FOR-SM
Hello Sir, I know that in case of roaming scenario GMSC sends sendRoutingInfoForSM message to HLR which sends message to MSC/VLR that provideRoamingNumber. The VLR returns response with the...
View ArticleForum Post: using .net to send text message with DNI310TEPE2HMP
Hi, I have installed an DNI310TEPE2HMP on my computer. and i can start device service. I want to use the C# to create a new application to send ISDN D - channel message. ex: send text message to...
View ArticleForum Post: what is the command to check the current TPS
Hi Experts; Do we have any Dialogic Sigtran command to check TPS (current utilization)? i verified the ./gctload -t1, but not sure it is helpful to find the TPS utilization? Thanks Regards Raam
View ArticleForum Post: RE: SEND-ROUTING-INFO-FOR-SM
when HLR recieves the SRI-SM , it doesnt fire a PRN , it responds back with the location it has in the internal registers for that subscriber
View ArticleForum Post: RE: SEND-ROUTING-INFO-FOR-SM
SRI-SM is for SMS. the gmsc shall send SRI to thr HLR. the HLR will reply the MSC/VLR number. then the GMSC shall send PRN to thr MSC/LR then route usimg the replued roaming number.
View ArticleForum Post: How to set active_talker_region and active_talker_interval...
Hello, Does anybody know how to setup the active_talker_region and active_talker_interval in restful XMSConference? We create a new XMSConference using the factory method // ex. XMSConference...
View ArticleForum Post: RE: SEND-ROUTING-INFO-FOR-SM
Is SRI different from sendRoutingInfoForSM or its same as i am dealing with roaming scenario
View ArticleForum Post: RE: what is the command to check the current TPS
Hi All; Anyone have idea? Regards Raam
View Article