Forum Post: Dialogic D/82JCT-U card issues
Doubt I am in the right spot, but here goes: I have a Dialogic D/82JCT-U card, which I have put in a machine with the SR6 software. After I do the Autodiscover Device, and the card is seen in the...
View ArticleForum Post: RE: Dialogic D/82JCT-U card issues
A couple things come to mind... First is this is PCIe board, then maybe this: www.dialogic.com/.../JCT Second, check PAE setting: www.dialogic.com/.../JCT Jeff
View ArticleForum Post: RE: Dialogic D/82JCT-U card issues
I have found the answer, after much thinking and screaming. The motherboard that the Dialogic is plugged into has no on board video. So I put in one of the PCI slots a video card. This was the source...
View ArticleForum Post: RE: Diva V-xPRI Media Boards -- How to access COM ports across...
Diva boards support CAPI, so you might find what you are after with LAN CAPI. E.g.: www.hanewin.net/.../isla.htm
View ArticleForum Post: RE: Products Licensing Issue
As detailed in this sticky www.dialogic.com/.../13097.aspx , if you are using any license file (Fax, modem, codec...) with a Diva product, you must upgrade to 8.5 SU14. If you do not, the license will...
View ArticleForum Post: Program to connect Diva UM 4 port analog call to Diva PRI/T1-CTI...
I need to be able to test my Diva T1 cards by connecting a cross over cable between the T-1 cards. Will call into the UM 4 port analog card and have the call connected to a time slot on the T1 card....
View ArticleForum Post: RE: Program to connect Diva UM 4 port analog call to Diva...
You can use the Diva SDK to bridge the connection between the T1 and the analog Diva boards. You will have to use the Line Interconnect methods, have a read through the SDK reference guide:...
View ArticleForum Post: RE: **911 Assistance** Help! Dialogic DMG1008DNIW - Exchange 2013...
I am curious to know if this issue was resolved and how.
View ArticleForum Post: RE: Exchange 2013
I have a customer with two DMG2120 media gateways running 6.0.SU6 that were installed and configured in 2009 to work with two Exchange 2007/SP2 UM servers. The customer has now deployed four...
View ArticleForum Post: Problems to send colored fax with DivaSendFax
I'm working on an application (using SDK of Diva, on Diva analog board) which shall send colored FAXs. Before the fax is sent via function DivaSendFax the function DivaValidateFile is called which...
View ArticleForum Post: RE: Problems to send colored fax with DivaSendFax
Colour fax generally uses a jpg file, not tiff. I have attached a simple sample that will work with the SDK.
View ArticleForum Post: RE: Diva V-xPRI Media Boards -- How to access COM ports across...
Also look for com poer sharing/redirection software. There are several packages that customers have used with success with Diva boards such as www.virtual-serial-port.org/.../serial-over-ethernet
View ArticleForum Post: RE: IPMEV_INIT_RECEIVED repeated when already received...
Hi, Not sure about the scenario and context of this behavior. In general, it may be related to network where first ACK may not safely reach to the remote end point. This is theory and I don't see...
View ArticleForum Post: Transferred calls do not go to voicemail DMG1008DNI with Exchange...
Normal calls are going to voicemail when people do not answer, but when someone calls and is transferred to an extension, the voicemail never picks up. Any help would be appreciated.
View ArticleForum Post: RE: Problems to send colored fax with DivaSendFax
The given jpg file was working fine. But the following items had to be considered too: - The API DivaValidateFaxFile may not be used in conjunction with a jpg file format. An error is reported for...
View ArticleForum Post: Problem with more calls at same time
Hi guys, I am using the Diva component API. When I am working more calls at the same time, I sometimes face the problem, that one call just cancels without any reason. (Not even onDisconnected event...
View ArticleForum Post: RE: Program to connect Diva UM 4 port analog call to Diva...
So far the methods all seem to require a phone # as a parameter. I don't have any phone # to use, just need to connect to a time slot. looking for something like the old nr_scroute function to connect...
View Article
