Forum Post: PowerMedia XMS Release 3.5 Service Update 2 (Build 18534) Now...
Download link: https://www.dialogic.com/products/downloads/xms/xms Release notes: https://www.dialogic.com/webhelp/XMS/3.5/XMS_ReleaseNotes.pdf The following features were added : Added Auto-Save...
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
No, the incorrect address is selected since windows HMP SU baseline does not support IPV6 right now. You need to make sure the IPV4 based address is selected for the NIC adapter of which you want to...
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Jeff, Thank you for your answer. I have changed the IP to 10.0.0.5 (see below). When I start the device in the DCM, it remains in the "Start Pending" mode forever... (see below) Please advise. Thank...
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Jeff, After I restart Windows, the DCM window still shows System Status "Start Pending". The Event Viewer log shows the following error: The description for Event ID 3 from source dm3nk cannot be...
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Jeff, The DCM now starts and the system status is "Running" using the IP address 10.0.0.5. However, when I run the demo program, the phone call is initiated, but when I answer the call I don't hear...
View ArticleForum Post: KB4056892 Causes Access Denied for HMP
Installing KB4056892 causes DCM to report errors: Failed to get installed families(s) Access is denied Failed to get the system mode Access is denied Windows 10.0.16299.192 Dialogic SU375
View ArticleForum Post: RE: KB4056892 Causes Access Denied for HMP
Yes, we are aware of the issue as of this morning since Microsoft released it yesterday for the "meltdown and spectre" issues at the intel chip level. The issue not only seen on windows 10, but other...
View ArticleForum Post: RE: DCM error - The system is in start/stop pending mode...
There may a known issue which was fixed internally, but not yet released for restart of services on win 2016 and 10 systems. Jeff
View ArticleForum Post: RE: DCM error - The system is in start/stop pending mode...
Thanks Jeff. Can you please tell me when the fix will be released? Mike
View ArticleForum Post: Windows update
Hi all, Could anybody help me with 4 port Dialogic analogue module. Problem appears after windows update. After Windows update Dialogic sometime stop open ports and answer to calls. After restart of...
View ArticleForum Post: RE: DCM error - The system is in start/stop pending mode...
It will be available in the next SU released for HMP 3.0 baseline. Hopefully, this month pending completion of some other ongoing work for the build content. Jeff
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
What network codec (ie audio) is your sip phone configured for? Jeff
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Jeff, It is: G.711ulaw. See the line below from the CFG file. iptB1T1 SIP Out ipmB1C1 SIP:userA@146.152.65.211 dxxxB1C1 REQH 0 G.711ulaw 20 N/A G.711ulaw 20 N/A Thanks. Mike
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Yes, that is on the application side, but just to clarify, what is your end-point side configured for? ' What phone are you using? Jeff
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Additional thought, do you have firewall enabled on the system? If so, Can you disable it? Otherwise you have to unblock traffic on HMP RTP ports for outbound/inbound traffic to flow. Meaning ports...
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
I tried my cellphone (Samsung S8) and a landline phone. The result is the same. The firewall is disabled on the server and also on the router. Thanks. Mike
View ArticleForum Post: RE: KB4056892 Causes Access Denied for HMP
Just posting technote posted for this topic. www.dialogic.com/.../pm_hmp_win Regards, Jeff
View ArticleForum Post: RE: KB4056892 Causes Access Denied for HMP
Just posting technote posted for this topic. www.dialogic.com/.../pm_hmp_win Regards, Jeff
View ArticleForum Post: RE: gc_hmp_hold_retrieve demo project - the call is successful...
Ok, sounds like there might be some environment issue in this case. I would suggest capturing a wireshark trace to see if the RTP if flowing in both directions for your SIP call. Looks like there may...
View ArticleForum Post: RE: Does 2g,3g,4g all are GSM
3G is an improvement of the older 2G standard and introduces multiple advanced features. The most significant is video calling, which allows the two parties to see each other during the call. Another...
View Article