when I chose yes I got this PROCESSING: Build chan_capi ... FAILED
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
↧
Forum Post: RE: HMP CRASH SINCE SU354
Hello, Thank you for your help. I'm not sure that my problem is the same as you. I do not use the ipmGetCapabities function in my code. I will anyway check my media functions. Yvan
↧
↧
Forum Post: RE: HMP CRASH SINCE SU354
Hi jeff, The crash occurs when there are one or more sessions in progress. For the stack, the server is in production. I do not know the stack back up on a process that is compiled in release mode. Thank you for your help. I'll try to see with Dialogic Support. Yvan
↧
Forum Post: RE: HMP CRASH SINCE SU354
I guess you would need to enable user-mode dump collection to get the proper application exe based dump file (full): msdn.microsoft.com/.../bb787181(v=vs.85).aspx Jeff
↧
Forum Post: HMP 367 + T.38 fax
Hello, I decided to test HMP 367 update. Everything seems to be working as usual, but one thing is broken - T.38 fax, I cannot send it from one HMP channel to another though with previous updates it worked normally. T.38 fax connection is established properly, but then fx_sendfax and fx_rcvfax immediately after execution return with errors: On the incoming channel: TFX_FAXERROR. Fax disconnect occurred, phase E status: Receiver communication error On the outgoing channel: TFX_FAXERROR. Fax disconnect occurred, phase E status: Timed out while waiting for a message I don't understand how an error can be related to "timeout" when it is received immediately after the function execution. Hello, I decided to test HMP 367 update. Everything seems to be working as usual, but one thing is broken - T.38 fax, I cannot send any fax from one HMP channel to another though with previous updates it works normally. The situation is following: T.38 fax connection is established properly, but then fx_sendfax and fx_rcvfax immediately return after execution with errors: On the incoming channel: TFX_FAXERROR. Fax disconnect occurred, phase E status: Receiver communication error On the outgoing channel TFX_FAXERROR. Fax disconnect occurred, phase E status: Timed out while waiting for a message I don't understand how an error can be related to "timeout" when it is received immediately after the function execution. G.711 fax are sent and received properly. Could you help me?
↧
↧
Forum Post: RE: HMP CRASH SINCE SU354
Thank you, Jeff. I try this now. Yvan
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
The latest available Diva SR 9.6 SU3 LIN only supports Asterisk versions up to 1.8. Are you using anything later than that maybe?
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
I am using asterisk 11.23
↧
Forum Post: Use of ATI in SMSC
What is the use of ATI request with respect to SMSC? what are the basic ATI map parameters set by SMSC?
↧
↧
Forum Post: HMP 367 + T.38 fax
Hello, I decided to test HMP 367 update. Everything seems to be working as usual, but one thing is broken - T.38 fax, I cannot send any fax from one HMP channel to another though with previous updates it works normally. The situation is as following: T.38 fax connection is established properly, but then fx_sendfax and fx_rcvfax return with errors immediately after execution. On the incoming channel the error is: TFX_FAXERROR. Fax disconnect occurred, phase E status: Receiver communication error On the outgoing channel the error is: TFX_FAXERROR. Fax disconnect occurred, phase E status: Timed out while waiting for a message Weird thing to see the "timeout error" when it is received right after the function starts executing. G.711 faxes are sent and received properly. rtflog.zip is attached. Could you help me to resolve this problem?
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
That is not supported and there is no ongoing development to get version 1.8+ supported.
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
I tried to install asterisk 1.6 and 1.8 but I got errors while run the Make command 1.6 /asterisk-1.6.2.24/Makefile.rules:136: recipe for target 'hashtest2' failed make[1]: *** [hashtest2] Error 1 Makefile:422: recipe for target 'utils' failed make: *** [utils] Error 2 1.8 /asterisk-1.8.8.0/Makefile.rules:130: recipe for target 'chan_iax2.so' failed make[1]: *** [chan_iax2.so] Error 1 Makefile:395: recipe for target 'channels' failed do you what causing this errors?
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
also while install the driver on the physical Linux machine and running ./Config I got 'DIDD' driver load failed. Please check system installation (kernel version, missing files) what is the cause of this issue?
↧
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
It usually means that the /usr/src/linux symlink is pointing to a kernel source directory that does not match the running kernel version. However in your case this could be due to an unsupported kernel version (3.10+).
↧
Forum Post: RE: Install Diva Media board on Linux: Build error
I downloaded the the Kernel 3.10.103 source from https://www.kernel.org/ and moved is content to usr/src/linux by running uname -r I got 4.4.0-42-generic is there a solution?
↧
Forum Post: RE: Layouts for a conference
I tried creating 2 conferences and made a single call. I added the call to one conference and it worked. But then I tried to add the call to the second conference and got a 400 error. For your solution to work, I need to have the same call in different ocnferences at the same time. Is that possible? Are there some limitations under which it is feasible?
↧
Forum Post: How to determine presence of analog line
How do you determine if an analog line is present on a Diva analog-4 PCIe board? (I don't see any function that could give information. With AudioCodes board I used "MtGetLVDetectValue" function to get line voltage)
↧
↧
Forum Post: Maximum Number of H.323 Integration Links
SR140 to Avaya CM over H.323 IP Trunks. What is the maximum number of individual Avaya systems I can interface with? Currently interfacing to a single instance of CM, wish to add one or two more individual instances. Searched blogs and support docs, no information found. Thank you for your help.
↧
Forum Post: RE: How to determine presence of analog line
The only way is to make a dummy call just to verify that there is a dial tone, just like the Line Test tool that comes with the driver.
↧
Forum Post: RE: HMP 367 + T.38 fax
Delete this duplicate post, please
↧