Forum Post: RE: BICC make call fails
For the first one, was the call disconnected by your own digression at the application level, or by the remote side? I know in some cases, the value may not be populated correctly for GC SS7 variant...
View ArticleForum Post: PIMG and Centrex - internal calls fail
We are using a 80LS and a Lucent 3A Translator to connect via serial SMDI to a Centerx CO switch. VM system -- SIP -- PIMG -- 3A Translator -- Serial to CO SW If a caller calls from outside the...
View ArticleForum Post: RE: BICC make call fails
Thank you Jeff, Calls disconnected by remote site. I will double check then feedback you
View ArticleForum Post: RE: BICC make call fails
Hi Jeff, This is my information I captured screen when almost calls made failure. My license M3UA have only 4 link but I have 500 CIC BICC, Peak time, my system have about 145 calls concurrent? There...
View ArticleForum Post: RE: PIMG and Centrex - internal calls fail
It looks like the second call is not actually picked up. There is no switch from idle to ringing, here's the good case: 093:20.150 [Tel-1 ] Code eALGFXO_EVENT_RING in eALGFXO_STATE_IDLE In the...
View ArticleForum Post: PowerMedia™ XMS 3.1 (Build 12402) is now available
Available for download at: http://www.dialogic.com/en/products/downloads/xms/xms.aspx Note: A valid PowerMedia XMS service contract is required to download the software. PowerMedia™ XMS Release 3.1...
View ArticleForum Post: RE: Max Digit Phone Number
Hello Jeff Mason! Thank you for your reply and sorry for the delay to answer! The SR installed is the last one 271 and the board is D/600-JCT-2E1.
View ArticleForum Post: RE: BICC make call fails
Hi Jeff, I attach more information ./gctload -t1, -t2, -t3 http://www.mediafire.com/download/yaz2k1ywt3b7rfv/gctload-t2.txt
View ArticleForum Post: DCM not detecting HMP_SOFTWARE on Windows 2012
We installed lates HMP for Windows 2012 Server. First everything worked well for a while, but then system stopped answer calls. HMP Log: 03/19/2016 07:37:41.754 4488 5616 dm3low ERR1 Dm3MsgDispatcher...
View ArticleForum Post: RE: DCM not detecting HMP_SOFTWARE on Windows 2012
There type of error above are an indication that HMP driver is not running properly or having issue on the system. When you reinstall, do you perform full uninstall first? Are you saying now, that...
View ArticleForum Post: SCPPN_CODE_SHIFT parameter configuration
Hi, Can someone guide me to configure SCPPN_CODE_SHIFT parameter. I have enabled the SCPXF_SEGMENTATION option. But to support a length 255 I want to enable SCPPN_CODE_SHIFT also but couldn't find...
View ArticleForum Post: Missing DivaEventCallConnected
We're simulating an SMS-client and SMSC with a DIVA analog board over an analog line. Now we discover that app. 10% of the calls fail as the outgoing side does not receive the event...
View ArticleForum Post: RE: DCM not detecting HMP_SOFTWARE on Windows 2012
HMP uninstall / install failed so OS is now rebuild and reconfigured. Everything seems to work so far, but getting lines above on error log on incoming call 03/23/2016 09:11:13.933 1796 4124...
View ArticleForum Post: RE: DCM not detecting HMP_SOFTWARE on Windows 2012
The above will happen when you don't specify correct codecs in GC level for capabilities in respect to what is available in the license. What is being set at the app level for coder capabilities. Jeff
View ArticleForum Post: TCAP dialog abort with other user reason
Hi, I am currently developing a system to handle sms, I have a problem when I try to handle some long smss, When I look into the issue, found that in the initial process the TCAP dialog request is...
View ArticleForum Post: Sending of sequential Short Messages (SMSs) not stable
I'am developping an SMS application which sends Short Messages via an analog line (using the Diva Analog-8 card) towards an SMSC application.The SMSC application receives Short Messages as weill on an...
View ArticleForum Post: 2E1 Not Work Both with DMV600BTEP
Hi Sir I have Problem When I Want to start 2 E1 When I use 1 E1 I runing from my Application Ok But when I running 2 E1 First one is Runing second One return error Can not set Handler System...
View ArticleForum Post: RE: 2E1 Not Work Both with DMV600BTEP
My Card support 2 E1 I worked With 1 E1 in the past Now I need add another Channel in My Card
View ArticleForum Post: PROBLEM WITH CONNECTION BETWEEN PBX OXE ALCATEL AND VIRTUAL HOLD...
Good Morning I have a link between a PBX Alcatel OXE and a server with a dialogic, using a coaxial cable. The problem is that the connection between the two elements is cut every so often and see...
View ArticleForum Post: RE: PROBLEM WITH CONNECTION BETWEEN PBX OXE ALCATEL AND VIRTUAL...
Good morning when the link is down between the PBX and the dialogic server I reset the server dialogic and in the logs i can see inthe event viewer that the mercconfig dlgcmpd driver failed not start...
View Article