Forum Post: Dialogic Brooktrout function can't be used in non-static...
I'm using tfax_2008 sample code (c++) that comes with Dialogic Brooktrout SR140 SDK. I was able to compile the application with no problems. However, I created a class and I have used same API...
View ArticleForum Post: Help Licence
HI: We have HP servers, with the following M3UA, SCCP, TCAP and Diameter licenses. We must change these servers in a few months since the HW warranty is terminated, which is the procedure to...
View ArticleForum Post: RE: How to extract Camel Version 2 IDP Extension Field ??
Hi, You don't say if this is CAP v2 as well? If it is CAP v3 or v4 then there is a specific parameter to use (INPN_GMSCAddress). This is covered in the CAP v3/v4 InitialDP operation tables in the...
View ArticleForum Post: Problems suddenly with gc_GETCALLINFO
My mature outbound calling application has suddenly developed a problem. The call is answered, but it appears the gc_GETCALLINFO function never returns with a result. Any ideas what could suddenly...
View ArticleForum Post: Call Troubleshooting
What is the current recommended call troubleshooting methodology? Back in the day we would turn on RTF tracking. What is recommended now? And while I have your attention, my global call header files...
View ArticleForum Post: RE: capturing sccp calling and called address in tcap handshake mode
Dear All, Please help!!
View ArticleForum Post: RE: Call Troubleshooting
To answer your first questions it depends on the technology and protocol of which you are using in this case. As that would decipher the modules you would look to enable in RTF to get more data in...
View ArticleForum Post: RE: Call Troubleshooting
Regarding SDK, What checkboxes, I see a single 243MB download, please clarify. In regards to tracing, I use Global Call protocall and Springware boards
View ArticleForum Post: RE: Call Troubleshooting
Nevermind on the checkboxes, I realized you are referring to the install page. Thanks I would still like some clarification on tracing procedures, using Global Call and Springware.
View ArticleForum Post: RE: Call Troubleshooting
Yes, sorry, I was referring to one of the pages on the actual install shield script in this case. Ok, if you are using GC, what protocol are the lines themselves? Is this just T1 E&M or some...
View ArticleForum Post: RE: Problems suddenly with gc_GETCALLINFO
For others down the road, problem turned out to be a conflict with Virus Protection Software Removed and problem went away.
View ArticleForum Post: dsistat sctpa error - failed reply
Dear Developers, I came across a strange behavior of sigtran dsistat tool: [root@server]# . /dsistat SCTPA STATUS 0 SNLINK SCTP STATUS ADDRS RWND UNACK PEND PRIMARY Failed. ID cannot be...
View ArticleForum Post: Cox email technical support
We have smart and experienced technicians for Cox email issue. Solution of each problem has the dedicated professional team. They can find your email issue. Our Cox email technicians are available on...
View ArticleForum Post: Diva SDK for HMP Powermedia
Hi, I was told that Dialogic no longer support Diva SDK using HMP, is this still correct and is there any other Diva VOIP option ? Regards Kevin
View ArticleForum Post: Programming phone settings through diva API for .Net and diva...
Hi, I need to make a programming call to VPP phones to set factory default settings through dialogic diva API in c#.net and Dialogic Diva Analog 4 PCie media board. Any leads in this direction will...
View ArticleForum Post: Problems again with GC_GetCallInfo
Well, the problem is back. My mature outbound calling application has developed a problem. The call is answered, but it appears the gc_GETCALLINFO function never returns with a result. What timeout...
View ArticleForum Post: No GCEV_UNBLOCKED after gc_OpenEx()
We are using Dialogic SR 6.0 Build 271 on Windows using NI2 protocol. We have an intermittent problem with our application first starts. What we see happening is that after the gc_OpenEx() call we do...
View ArticleForum Post: RE: Problems again with GC_GetCallInfo
Hi, Its possible that something may not be provided from the switch side in this case. But it really depends on the protocol you are running in this case. What is being used here? Analog? Or GC with...
View ArticleForum Post: RE: Problems again with GC_GetCallInfo
P_pdk_na_an_io I'm trying to determine voice or machine answer. Is there a timeout parameter. This is an intermittent problem. One days calls go out fine, the next they do not. No changes to the...
View Article